|
Introducing at PITTCON 2010 a new smart dosing pump
for the lab!
The new SIMDOS® diaphragm liquid dosing pump from KNF Neuberger, Inc.
is designed with simplicity in mind. The easy-to-read display combined with a
touch control knob makes programming and access of all functions very intuitive.
Diaphragm pumps are ideally suited for transferring the corrosive liquids often
found in laboratories.
The SIMDOS® pump is available with a variety of wetted materials, including
PTFE/FFPM. The pump head is situated outside the splash-protected IP-65 housing,
a significant safety factor. Fast, precise calibration is crucial for any dosing
pump.
The SIMDOS® pump accomplishes this in the shortest times
possible. Following calibration, repeatability is +/-1%. The pump transfers liquids
with a flow rate of 0 to 100ml/min and doses volumes of 0 to 1000 ml. It offers
long-term stability and consistent reliability throughout entire processes. The
pump is safe to run dry and is self-priming up to 9 ft of water. It is effective
against pressures of up to 90 psig and transfers viscous media up to 150 centistokes.
Uses 1/4" compression fittings for 1/8" ID tubing.
The integrated software permits the transfer parameters to be modified for
a range of different viscosities at the touch of a button. Designed to have a
compact footprint, the pump takes up little valuable lab bench space.
• Easy and intuitive programming
• Easy calibration
• Pause function
without data loss
• Minimal footprint
• S Model - Front panel control
• RC Model - Front panel plus remote control capable:
- (0 to 100%) using 0-10V, 0-20mA, 4-20mA signals
- Start-stop thru logic control
- Reset/prime thru logic control
- Output signal fault alarm
- Cable for external control included
- Available footswitch accessory
 for
datasheet
|
