A1 KNF Heated Head and Heat Resistant Stack-Gas Sampling Pumps for Analyzers

Call KNF at 609-890-8600

Home > Process Pumps > Heated Head Sample Pumps:

A collection of technical articles on diaphragm pumps

To download a pdf of KNF's Heated Head brochure: Download a technical article about these pumps:
Datasheets are available for downloading, viewing and printing in the Acrobat PDF format by clicking on the pump model number below. Information on how to obtain the free Adobe reader is available HERE.

Pump Series (Link to Datasheets)	Available Motors	Flow Rate LPM	Flow Rate CFM	Max Vacuum in. Hg	Max Pressure psig
N86 (PDF:925kb/4pgs)	AC	6	.21	21	22
N012 (PDF:925kb/4pgs)	AC	10.5	.37	22.8	22
N024 (PDF:925kb/4pgs)	AC	18	.64	24	22
N036 (PDF:925kb/4pgs)	AC	34	1.2	24	20
N036.0 (PDF:225kb/4pgs)	AC	30 per head	1 per head	24	20
N0100ST.26E (PDF:250kb/5pgs)	AC	100	3.5	24.8	22

Model N024ST.26E is a stainless steel heated-head sampling pump. It is shown with included insulating jacket for thermal stability and safety, and available programmable, electronic temperature controller with RS-232 computer interface and fan cooled, totally-enclosed motor.

Model N86ST.16I is a 316 stainless steel mini heat-resistant sampling pump for analytical instruments. Our smallest heat-resistant pump, it is excellent for use in smaller analyzers. It handles high temperature gases safely by isolating heat from the motor, bearings or other critical components, extending pump life. These pumps are popular for use for exhaust gas and stack gas sampling systems where long life and consistent performance are critical. This pump is also available with aluminum heads.

About Heated-Head Pumps and Controls

These heat-resistant and heated-head series of air and gas diaphragm pumps represent one of KNF's many specialized designs. Equipped for the efficient transport of hot gas samples in environmental and analytical instruments, they handle gas temperatures up to 460°F (240°C). Special construction isolates the bearings and motor from the heat for longer component life. The heated-head model uses an electrically-heated cartridge regulated by a thermostat or an optional programmable temperature controller, to maintain specified head temperature. Heating the heads prevents condensate from forming within the head, reducing pump corrosion and eliminating sample component dropout.
Supplied without the heating system, the heat-resistant model uses identical heat-isolating construction and is ideal for handling hot, gaseous samples. Other element temperatures are available.

(.16) Heat-resistant model
(.11) Heated-head model temperature regulated by mechanical thermostat
(.26) Heated-head model temperature regulated by programmable controller

Control panel of programmable controller

Unit Conversion Tools: Chemical Resistance Chart:

NOTES: Standard continuous performance ratings listed on this KNF website and on KNF datasheets are based on technical data and test results of nominal units at sea level, measured with an ambient temperature of 70°F (21°C), and nominal electrical supply as listed above, and are for reference only.Multiple-head models, different performance models, cost-effective OEM modifications, and a variety of motor options and different materials of construction are also available. Certified drawings are available upon request. Specifications subject to change without notice. You should always check corrosion resistance charts for compatibility with the medium you intend to pump.

KNF NEUBERGER, INC.
Two Black Forest Road
Trenton, New Jersey 08691-1810
609-890-8600 • Fax 609-890-8323 • site map